dellemc.openmanage.idrac_timezone_ntp module – Configures time zone and NTP on iDRAC
Note
This module is part of the dellemc.openmanage collection (version 8.5.0).
To install it, use: ansible-galaxy collection install dellemc.openmanage
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: dellemc.openmanage.idrac_timezone_ntp
.
New in dellemc.openmanage 2.1.0
DEPRECATED
- Removed in:
major release after 2024-07-31
- Why:
Replaced with dellemc.openmanage.idrac_attributes.
- Alternative:
Use dellemc.openmanage.idrac_attributes instead.
Synopsis
This module allows to configure time zone and NTP on iDRAC.
Requirements
The below requirements are needed on the host that executes this module.
omsdk >= 1.2.488
python >= 3.9.6
Parameters
Parameter |
Comments |
---|---|
The Privacy Enhanced Mail (PEM) file that contains a CA certificate to be used for the validation. |
|
Allows to enable or disable NTP on iDRAC. Choices:
|
|
iDRAC IP Address. |
|
iDRAC user password. |
|
iDRAC port. Default: |
|
iDRAC username. |
|
The IP address of the NTP server 1. |
|
The IP address of the NTP server 2. |
|
The IP address of the NTP server 3. |
|
Allows to configure time zone on iDRAC. |
|
(deprecated)Local mount path of the network share with read-write permission for ansible user. This option is mandatory for network shares. This option is deprecated and will be removed in the later version. |
|
(deprecated)Network share or a local path. This option is deprecated and will be removed in the later version. |
|
(deprecated)Network share user password. This option is mandatory for CIFS share. This option is deprecated and will be removed in the later version. |
|
(deprecated)Network share user name. Use the format ‘user@domain’ or ‘domain\user’ if user is part of a domain. This option is mandatory for CIFS share. This option is deprecated and will be removed in the later version. |
|
The socket level timeout in seconds. Default: |
|
If Configure Prior to collection version Choices:
|
Notes
Note
This module requires ‘Administrator’ privilege for idrac_user.
Run this module from a system that has direct access to Dell iDRAC.
This module supports both IPv4 and IPv6 address for idrac_ip.
This module supports
check_mode
.
Examples
---
- name: Configure time zone and NTP on iDRAC
dellemc.openmanage.idrac_timezone_ntp:
idrac_ip: "190.168.0.1"
idrac_user: "user_name"
idrac_password: "user_password"
ca_path: "/path/to/ca_cert.pem"
setup_idrac_timezone: "UTC"
enable_ntp: Enabled
ntp_server_1: "190.168.0.1"
ntp_server_2: "190.168.0.2"
ntp_server_3: "190.168.0.3"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Details of the HTTP Error. Returned: on HTTP error Sample: |
|
Overall status of the timezone and ntp configuration. Returned: always Sample: |
|
Job details of the time zone setting operation. Returned: success Sample: |
Status
This module will be removed in a major release after 2024-07-31. [deprecated]
For more information see DEPRECATED.